Motorola System V/88 Release 3.2 Version 1.2

Special thanks to R. Stricklin for donating the tape.

First boot after install on MVME181

Copyright Motorola Inc. 1988, 1989, All Rights Reserved

MVME181 Debugger/Diagnostics Release Version 3.01 - 08/17/89
COLD Start

1) Continue System Start Up
2) Select Alternate Boot Device
3) Go to System Debugger
4) Initiate Service Call
5) Display System Test Errors
6) Dump Memory to Tape
Enter Menu #: 3
181-Diag>iot;h
Disk Controllers Available
Lun Type Address # Devices
4 VME350 $FFFF5000 1
8 VME323 $FFFFA000 4
181-Diag>bo 8
Booting from: VME323, Controller 8, Drive 0
Loading: Operating System

Volume: $00000000

IPL loaded at: $001F0000
VME Disk IPL Version 05/02/89 21:51:43

***********************************************************************

UniSoft UNIX System V/88 Release 3.2 M88100 Version 1.2

Real mem = 8388608
Avail mem = 6553600
Buffers = 512

***********************************************************************



Default Timezone may be incorrect.
You must login as 'setup' to change this.
Is the date Wed May 3 14:09:59 EDT 1989 correct? (y or n) y
Enter to stop in single user mode during system boot.
Default boot sequence continuing...
The system is coming up. Please wait.

This machine has not been used as a customer machine yet. The messages that
follow are from checking the built-in file systems for damage that might have
occurred during shipment. As long as you do not see either of the messages
BOOT UNIX
or FILE SYSTEM WAS MODIFIED
all is well. If either message does come out, call your service representative.
However, the machine is still usable unless you are told otherwise.
Checking file systems:


/dev/dsk/m323_0s2
File System: usr Volume: D0

** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Free List
3078 files 50042 blocks 154394 free



Welcome!
This machine has to be set up by you. When you see the "login" message type
setup
followed by the RETURN key. This will start a procedure that leads you through
those things that should be done the "first time" the machine is used.

Until you do so, the above filesystem shipment damage check will be run
each time you boot.

mount -f S51K /dev/dsk/m323_0s2 /usr
M88K SYSTEM CONFIGURATION:

Memory size: 8 Megabytes
System Peripherals:

Device Name Subdevices Extended Subdevices

Disk ESDI m323
Cartridge Tape m350
Ports m335
Process accounting started.
Error logging started.
Stream Error logging started.
The system is ready.

Console Login: root

UniSoft UNIX System V/88 Release 3.2 Version 1.2 M88100
unix
Copyright (c) 1988 AT&T
Copyright (c) 1985 Motorola, Inc.
Copyright (c) 1988 UniSoft Corporation
All Rights Reserved

Warning: .lastlogin did not exist, creating it
# uname -a
unix unix 3.2 1.2 M88100
#